Build a flexible, inexpensive optical bench for laser pointers.
Introduction
Laser pointers can be held in binder clips. The legs of the binder clips can then be used to mount the laser pointers above a table surface. In addition magnets can be used to attach the binder clips to iron or steel mounts. The lasers can then be rotated and moved easily.
Material
A laser pointer
2 Binder clips large enough to grab the laser pointer
A refrigerator magnet
A rectangular object made of, or covered with, steel (such as a dead
6 volt lantern battery.)
Assembly
Place the laser in one or two binder clips.
Rotate the laser in the clips so that the binder clips squeezes the
button and turns the laser on.
Place a refrigerator magnet between the binder clip base and the
steel object.See the photo below.
The magnet should hold the laser and clip in place, if it does not,
get a bigger or stronger magnet..
Optional: Use the legs of two binder clips to hold the laser off the table top as shown below.
To Do and Notice
Notice that you can easily translate and rotate the laser.
When you position the laser and then let go, it remains solidly in place.
What's Going On?
Standard optical bench technology uses magnets to hold optical
components in place.
Magnets allow the components to be moved and yet hold them in place
when they are released.
Etc.
Activities which use the optical bench are
Scientific Explorations with Paul Doherty |
|
21 Feb 99 |